07-08-2009 01:49 PM
Hello everybody, greetings from Chile.
My English is bad and use the google translator.
I installed CW LMS 3.1 to 1.1 HUM and can not work with variables in cpu HUM 11,503 CCS equipment. Download and install the corresponding mibs and the problem is not solved.
I hope they can help, because in the cisco site, I have not found adequate support for the product.
Greetings,
Guilliano Palavecino Rojas
Communication Support Engineer
ADEXUS S.A
11-30-2009 01:38 PM
The device is reporting noSuchName when it queried for 1.3.6.1.4.1.2467.1.34.17.1.14. I believe this may be due to the fact that this object changed OIDs to 1.3.6.1.4.1.9.9.368.1.34.17.1.14. Does your switch respond to that OID?
06-22-2010 08:25 AM
Jclarke hello, updating the case, the answer to the query snmp-walk is zero.
The following is a SNMP walk of device 10.20.51.2 starting from .1.3.6.1.4.1.9.9.368.1.34.17.1.14
SNMP Walk Output
--------------------------------------------------------------------------------
.1.3.6.1.4.1.9.9.368.1.34.17.1.14
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.1.1 = INTEGER: 0
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.2.1 = INTEGER: 0
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.4.1 = INTEGER: 0
Thank you. I hope your valuable response.
Regards,
Guilliano Palavecino
Communication support enginer
Adexus S.A
06-22-2010 10:28 AM
Yes, it looks like the CSS is using the newer MIB to provide CPU information via SNMP. HUM is not aware of this new MIB. There is an enhancement request (CSCte41577) raised to address this.
06-22-2010 11:56 AM
thanks joe. I hope that the new versions that solved the problem. In any case in CCS delivers the information with online reports and reports of cacti CiscoView.
06-24-2010 08:11 AM
Joe,
Repeat the prube with another CCS version 8.10 and had a better result. Download from Cisco.com the mib CISCO-SMI to create a specific template for the OID .1.3.6.1.4.1.9.9.368.1.34.17.1.14 and then importing the MIB does not display anything.
Where I can download the correct mib?
The following is a SNMP walk of device 192.168.5.11 starting from .1.3.6.1.4.1.9.9.368.1.34.17.1.14
SNMP Walk Output
--------------------------------------------------------------------------------
.1.3.6.1.4.1.9.9.368.1.34.17.1.14
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.1.1 = INTEGER: 9
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.2.1 = INTEGER: 6
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.3.1 = INTEGER: 5
CISCO-SMI::ciscoMgmt.368.1.34.17.1.14.4.1 = INTEGER: 0
tranks, regards
06-30-2010 07:45 AM
UP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide