10-02-2007 10:01 PM
When I run the inventory report I have the following fields:
Updated At System - Name Domain - Name Description - Serial Number - Contact - Location ...
How can I add the "serial number"
I tried editing credentials but "SN" it's not the same as serial number.
Solved! Go to Solution.
10-08-2007 01:37 PM
For the chassis serial numbers you either enter then manually using Change Device Attributes or when you add a device manually to the RME database. If you want CampusManager to automatically discover the serial number you need to use the command "snmp-server chassis-id (serial number)" The problem with this is that some devices will not take this command and you have to enter the number manually.
10-08-2007 01:37 PM
For the chassis serial numbers you either enter then manually using Change Device Attributes or when you add a device manually to the RME database. If you want CampusManager to automatically discover the serial number you need to use the command "snmp-server chassis-id (serial number)" The problem with this is that some devices will not take this command and you have to enter the number manually.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide