09-13-2010 07:15 AM
Hi All,
situation:
LMS 3.2
Cat6509 w. 4 port 10 GE module connected with trunk to
HP BladeSystem c7000 Enclosure
with
HP Virtual Connect Flex-10 10Gb Ethernet Module
with
#20 of ESX servers, Citrix
UT settings: "config trunk for end host disc. = enable on this trunk."
No show for connected MAC's of the server and end hosts (Citrix sessions).
Note: this works well for a ESX based DL380 server connected with 1GB trunk to a C3750.
Why is this not working for this Cat6509 configuration ?
Is the 10 GE port supported in Campus manager?
regards,
09-13-2010 04:41 PM
Are you doing channeling across these links? Channeling is not supported yet for UT acquisition.
06-05-2012 02:44 AM
Hi Joseph,
Long time ago I started this discussion about UT support for portchannels. Right now we're on the level of LMS 4.2, do you know if there is any progress made with support for UT on portchannels?
Kind regards
Ad
06-05-2012 07:31 AM
Channel support is there in LMS 3.2.1 (i.e., the latest consolidated patch for LMS 3.2). This will be Campus Manager 5.2.2. This was also rolled into LMS 4.0.1, so it's in 4.2.
06-05-2012 07:37 AM
Hi Joseph,
Thank you for this quick answer.
Still we have troubles to get this working, can we debug this?
Which debug option do we have to enable?
kind regards
Ad
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide