LMS 4.0.1 and Catalyst C3560X-24-TS support

[ppoiron]

Hello,

We planned to update our customer LAN with C3560X-24-TS switches.

Now, we have a LMS 4.0.1 solution to manage the network.

I have not yet the 3560X-24-TS switch to try the update.

In the LMS 4.0.1 document: http://www.cisco.com/c/en/us/td/docs/net_mgmt/ciscoworks_lan_management_solution/4-0-1/device_support/table/lms401sdt.html#Cisco%20Catalyst%203560%20Series%20Switches , it seems this kind of switch is supported.

Could you please confirm this is the case for the main functions ?

Thanks in advance for your help.

Patrice

[AFROJ AHMAD]

Hi Patrice ,

Yes it is supported.

The following features are supported:

• Network Topology Layer 2 Services, User Tracking, VLAN Management
• Fault Management
• Inventory Collection
• Configuration Deploy Protocols: TELNET, SSH, TFTP, RCP
• Configuration Fetch Protocols: TELNET, SSH, TFTP, RCP
• Software Images Import from: Cisco.com, Device, File System, Network, URL
• Upgrade Analysis from: Cisco.com, Repository
• Software Image Import Connection Protocols: TELNET, SSH
• Software Image Import Transfer Protocols: TFTP, RCP, SCP
• Software Image Types for Distribution: System Software
• Software Distribution by: Advanced flow, Image, Remote Staging
• Software Repository Synchronization
• Software Image Distribution Connection Protocols: TELNET, SSH
• Software Image Distribution Transfer Protocols: TFTP, RCP, SCP
• CiscoView

The following features are not supported:

• VRF Lite, LANE Management
• Configuration Deploy Protocols: HTTPS, SCP
• Configuration Fetch Protocols: HTTPS, SCP
• Software Image Types for Distribution: Bootloader, CIP2, Mica Modem Firmware, Microcom Modem Firmware

Thanks-

Afroz

***Ratings Encourages Contributors ****