01-23-2012 05:35 AM
Hello all,
I searched on the internet wothout success about this theme.
I just added Nexus 7k and 5k to the CW LMS 4.0.1. SNMP OK, SSH ok. I just see the IP, OS Type, Version, but the device is UNKNOWN. Are my NX-OS versions good?
The NX-OS versions are:
Software
BIOS: version 3.5.0
loader: version N/A
kickstart: version 5.0(3)N2(2a)
system: version 5.0(3)N2(2a)
power-seq: Module 1: version v4.0
uC: version v1.0.0.2
SFP uC: Module 1: v1.0.0.0
BIOS compile time: 02/03/2011
kickstart image file is: bootflash:/n5000-uk9-kickstart.5.0.3.N2.2a.bin
kickstart compile time: 10/15/2011 9:00:00 [10/15/2011 18:44:53]
system image file is: bootflash:/n5000-uk9.5.0.3.N2.2a.bin
system compile time: 10/15/2011 9:00:00 [10/15/2011 20:35:57]
Hardware
cisco Nexus5596 Chassis ("O2 48X10GE/Modular Supervisor")
Intel(R) Xeon(R) CPU with 8299528 kB of memory.
Processor Board ID FOC15434ZU5
Device name: GYPRAC02G10
bootflash: 2007040 kB
Kernel uptime is 25 day(s), 9 hour(s), 41 minute(s), 11 second(s)
Last reset at 1410 usecs after Thu Dec 29 04:49:37 2011
Reason: Reset Requested by CLI command reload
System version: 5.0(3)N2(2a)
Software
BIOS: version 3.22.0
kickstart: version 5.2(1)
system: version 5.2(1)
BIOS compile time: 02/20/10
kickstart image file is: bootflash:///n7000-s1-kickstart.5.2.1.bin
kickstart compile time: 12/25/2020 12:00:00 [07/29/2011 13:34:35]
system image file is: bootflash:///n7000-s1-dk9.5.2.1.bin
system compile time: 6/7/2011 13:00:00 [07/29/2011 15:29:25]
Hardware
cisco Nexus7000 C7009 (9 Slot) Chassis ("Supervisor module-1X")
Intel(R) Xeon(R) CPU with 8260944 kB of memory.
Processor Board ID JAF1544ARCN
Device name: GYLNDS01G09--VD1
bootflash: 2048256 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 25 day(s), 11 hour(s), 1 minute(s), 31 second(s)
Last reset at 566212 usecs after Thu Dec 29 21:30:15 2011
Reason: Reset Requested by CLI command reload
System version: 5.2(1)
Service:
Thank you for your help!
Solved! Go to Solution.
01-23-2012 07:58 PM
Your devices with the NX-OS versions you indicate should be OK per the LMS 4.0.1 Supported Devices Table.
Have you updated your LMS with the latest device packages? See the procedure here.
01-23-2012 07:58 PM
Your devices with the NX-OS versions you indicate should be OK per the LMS 4.0.1 Supported Devices Table.
Have you updated your LMS with the latest device packages? See the procedure here.
03-26-2012 02:41 AM
Hello Marvin,
thanks! I was an issue with a bug (CSCto46927), after I installed the patch I was able to update the device packages. Thanks once again!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide