cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
533
Views
0
Helpful
1
Replies
Beginner

LMS 4.2.2 SNMPV3 Wrong Privacy Algorithm

Hi,

we use LMS 4.2.2 to manage our Cisco devices. At the moment all devices are managed with snmpv2.

I´ve picked one Catalyst 2960-24TT-L Version 12.2(25)SEE3 and configured snmpv3

Here´s the output of show snmp user:

User name: ciscoworks

Engine ID: 8000000903000022BD29EF40

storage-type: nonvolatile        active

Authentication Protocol: MD5

Privacy Protocol: DES

Group-name: LMS

Now, in LMS under Admin->Network->Device Credentials Settings-> i created a new credential set "snmpv3" with the correct user/password and following settings:

AuthPriv (enabled)

Auth Algorithm MD5

Privacy Algorithm DES (because the 2960 12.2(25)SEE3 doesn´t support any other alorithm).

I´ve edited the credentials and assigned the new set to that device. Now to test the snmpv3 credentials i´ve started an Device credential verification job an chose snmpv3 only. But every time the job failes with the error

Wrong Privacy Algorithm.

Can someone haelp me ou with this issue? Thank you.

Everyone's tags (6)
1 REPLY 1
Highlighted
Beginner

LMS 4.2.2 SNMPV3 Wrong Privacy Algorithm

OK, got it to work. The snmpv3 credential set didn´t overwrote the snmp options. Now everything works

CreatePlease to create content
Content for Community-Ad