LMS alert

[mj11]

Hi

I am seeing this error message coming from our core VSS pair's (at different sites) I have checked the syslogs but I am unable to see any interfaces going down on both the 6500's and the connecting edge 4500's. This setup has been fine for around 12 months with no errors and I am just checking to make sure nothing has changed but I don't think anything has.

EVENT ID = 000127G

ALERT ID = 00001G6

TIME = Fri 01-Apr-2011 21:38 BST

STATUS = Active

SEVERITY = Critical

MANAGED OBJECT = x.x.x.x

MANAGED OBJECT TYPE = Switches and Hubs

EVENT DESCRIPTION = OperationallyDown::Component=CARD-x.x.x.x/7044 [Chassis 2 X2 Transceiver 10Gbase-SR Te2/2/3-Chassis 2 Transceiver Te2/2/3];ComponentClass=Card;ComponentEventCode=1073;Status=NOTPRESENT;

CUSTOMER IDENTIFICATION = Core

CUSTOMER REVISION = 1

I am seeing more than just a couple of these, the LMS version is 3.2 and the 6500's are running 12.2(33)SXI4.

Any help much Appreciated

Regards MJ

[AFROJ AHMAD · Accepted solution]

Hi ,

1. Backup file NMSROOT/objects/smarts/conf/discovery/oid2type_Cisco.conf
2. Stop services
3. Replace the new oid2type_Cisco.conf
4. Start services
5. Delete/re-add VSS devices  from DFM ..

I hope you will not get any false Alarm after this !!!

Thanks--

Afroj

If this post answers your question, please click the "Correct Answer" button"

[mj11]

Hi Afroj

Thank you for the response, I will try and update.

Regards MJ

[mj11]

Hi Afroj

I can login to the box but when you run ciscoworks I see an error after login to Cisco works..

"403 forbidden"

Do you know how to get round this?

Regards MJ

[AFROJ AHMAD · Accepted solution]

Hi ,

Try Regenerating SSL certificate as below :

-   Stopped the Daemon Manager  :    net stop crmdmgtd

-       Deleted all the server.* files in $CSCOpx/MDC/Apache/conf/SSL

On command Prompt :

-       NMSROOT\CSCOpx\MDC\Apache>perl ConfigSSL.pl -disable

-       NMSROOT\CSCOpx\MDC\Apache>perl ConfigSSL.pl -enable  

      Fill all the required information !!!

-       Started the Daemon Manager using  net start crmdmgtd

Thanks--

Afroj