logging to router without config

[almog]

hello, i was asked in my class to find a solution to enable the router in cisco packet tracer and im having problem to configure it everything is lock except expect the server and R2 (only config tab locked)i tried to login from web browser since they provided with me with id and password  with no success any ideas ?

[Flavio Miranda]

Hi

 Share here your packet tracer file. You need to zip it first.

But, if you want to try it by yourself first, use a console cable between a PC and the router and get access to the router´s CLI. From there you can do you configurations. Router os packet tracer does not have web interface as fas as I know

[almog]

hi,first thanks for replaying

so the problem is everything in the topology is locked you cant add stuff either ! the only thing that isnt is the server PT in the bottom and the image i tried to connect to Router R2 from Server PT through the http with no success 

edit : oh and my teacher gave me an id and password so i know its through http for sure 

[Flavio Miranda]

Share your PacketTracer file here, let me take a look. You need to save the file and zip it, then attach here. 

[almog]

im afraid i cant do that because its on a website and it cannot be downloaded but i can share what ever is needed

[Flavio Miranda]

You are not running the PT on your machine? Alright then 

 As I said, router does not allow HTTP config on PT. Only wireless router does. 

 If you can not add a console cable to this topology then this lesson does not make sense. What this lesson expect from People? That they rack the program? 

[almog]

im sorry i replied an old comment 

[almog]

 

[MHM Cisco World]

are you config HTTP server in Router ?? 
are the interface you use to access router is UP/UP??

[almog]

hello thanks for replying , i wasnt clear with my question.

everything in the topology you see is locked, the only thing isnt is the Server PT my teacher provided me username and password 

and i tried to connect to the routher from Server PT through htttp but no success

[MHM Cisco World]

then your supervisor may missing config HTTP config in router or interface is down that way request timeout you see.
but one more thing can do
from SW or any device you can access to
ping the IP of router? if the router success then HTTP config missing 
if the ping failed then router interface is down.

[almog]

i can only access the pt server nothing else 

[MHM Cisco World]

ping router from server if you can