Greetings,
I'm trying to use MRM, but the "manager" doesn't seem to know it's source address, despite looking like it does.
I've tried multiple source interfaces.
-----------------------------------------ip mrm manager TEST
manager Serial0/0.1 group 225.0.0.1
senders 1
receivers 2
-----------------------------------------
R3#sh ip mrm manager TEST
Manager:TEST/1.0.0.1 is not running
Beacon interval/holdtime/ttl:60/86400/32
Group:225.0.0.1, UDP port test-packet/status-report:16384/65535
Test senders:
5.5.5.5
Test receivers:
1.1.1.1
-----------------------------------------
R3#mrm TEST start
Monitor source address is not configured
-----------------------------------------
???!!!! Another interface (loopback)
-----------------------------------------
R3#sh ip mrm manager TEST
Manager:TEST/3.3.3.3 is not running
Beacon interval/holdtime/ttl:5/86400/32
Group:239.0.0.1, UDP port test-packet/status-report:50000/50001
Test senders:
5.5.5.5
Test receivers:
1.1.1.1
R3#mrm TEST start
Monitor source address is not configured
-----------------------------------------
I've tried this on various 3640s running enterprise 12.3, and a 2500 running 12.2(32). All have the same result.
