So I have a Nexus 7K that has a EIGRP memory leak and it fails every couple of days. I cannot upgrade the code for quite some time. So i'm trying to create an EEM that restarts EIGRP when it loses it's EIGRP neighbors. This is what I have but it doesn't seem to work (I'm sure i'm missing something simple). Any assistance would be much appreciated.
event manager applet TRACK_EIGRP_DOWN
event syslog tag e1 pattern "Neighbor 10.80.33.6 (Vlan1252) is down"
event syslog tag e2 pattern "Neighbor 10.80.33.11 (Vlan1251) is down"
Purpose of the document
This document describes the general recommendations or best practices when designing and deploying the Cisco SD-Access technology. The document assumes that the reader has a general overview of Cisco's SD-Access for Distributed C...
Dear All, When I use the show interface command on the Cisco Router ISR-4331, it will display as below information. The word that I mark red, it refresh every 5 seconds. But, I compare with the old router model like a Cisco 29XX or 28X...
Whether you're attending VMworld 2019 on-site or from afar, read the latest on the key themes to expect. They are also the key themes for IT management today, from software defined everything to cloud and automation to IoT and edgecomputing : http:...