For xmit-error try: 1.3.6.1.2.1.2.2.1.20
For ifInErrors try: .1.3.6.1.2.1.2.2.1.14
.1.3.6.1.2.1.2.2.1.20
ifOutErrors OBJECT-TYPE
-- FROM IF-MIB
SYNTAX Counter
MAX-ACCESS read-only
STATUS Current
DESCRIPTION "For packet-oriented interfaces, the number of
outbound packets that could not be transmitted because
of errors. For character-oriented or fixed-length
interfaces, the number of outbound transmission units
that could not be transmitted because of errors.
.1.3.6.1.2.1.2.2.1.14
ifInErrors OBJECT-TYPE
-- FROM IF-MIB
SYNTAX Counter
MAX-ACCESS read-only
STATUS Current
DESCRIPTION "For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from
being deliverable to a higher-layer protocol. For
character-oriented or fixed-length interfaces, the
number of inbound transmission units that contained
errors preventing them from being deliverable to a
higher-layer protocol.
Here's the the whole table:
ifIndex .1.3.6.1.2.1.2.2.1.1
ifDescr .1.3.6.1.2.1.2.2.1.2
ifType .1.3.6.1.2.1.2.2.1.3
ifMtu .1.3.6.1.2.1.2.2.1.4
ifSpeed .1.3.6.1.2.1.2.2.1.5
ifPhysAddress .1.3.6.1.2.1.2.2.1.6
ifAdminStatus .1.3.6.1.2.1.2.2.1.7
ifOperStatus .1.3.6.1.2.1.2.2.1.8
ifLastChange .1.3.6.1.2.1.2.2.1.9
ifInOctets .1.3.6.1.2.1.2.2.1.10
ifInUcastPkts .1.3.6.1.2.1.2.2.1.11
ifInNUcastPkts .1.3.6.1.2.1.2.2.1.12
ifInDiscards .1.3.6.1.2.1.2.2.1.13
ifInErrors .1.3.6.1.2.1.2.2.1.14
ifInUnknownProtos .1.3.6.1.2.1.2.2.1.15
ifOutOctets .1.3.6.1.2.1.2.2.1.16
ifOutUcastPkts .1.3.6.1.2.1.2.2.1.17
ifOutNUcastPkts .1.3.6.1.2.1.2.2.1.18
ifOutDiscards .1.3.6.1.2.1.2.2.1.19
ifOutErrors .1.3.6.1.2.1.2.2.1.20
ifOutQLen .1.3.6.1.2.1.2.2.1.21
ifSpecific .1.3.6.1.2.1.2.2.1.22
Kirk...
