Hi Bjoern,
I am assuming you refer to the Device Center > Tools > Telnet/SSH option.
The problem is not on LMS actually. What happens is that in the background, a telnet:// is being called.
What will happen is that your system will launch whatever application has been assigned to the telnet protocol, typically the Windows CMD, which will open a telnet session automatically.
In order to change this to use Putty for example, which would allow you to change to SSH connectivity (manually though) you can do the following:
1) BACKUP YOUR REGISTRY.
Go to Start > Run > Regedit > File > Export.
2) Locate the following key:
HKEY_CLASSES_ROOT > Telnet > shell > Open > command > (default)
3) Modify the key value to point to the location of your "putty.exe" file (make sure to include the double quotes).
Default value:
"C:\Windows\System32\rundll32.exe" "C:\Windows\System32\url.dll",TelnetProtocolHandler %l
New value (will open putty automatically to the selected IP):
"D:\Tools\putty.exe" %l
New value (will open putty normally, you will need to type the IP but can change the connection protocol/port if desired):
"D:\Tools\putty.exe"
This should make your system open Putty for any "telnet://" links, including the Telnet/SSH link in the Tools section of Device Center.
Best regards,
Luis
Message was edited by: Luis Jimenez
Message was edited by: Luis Jimenez
