03-05-2020 08:48 AM - edited 03-05-2020 08:48 AM
Hey guys! I have a Cisco 881 router we deploy to home users. We send all traffic over a site-to-site VPN (including internet) to our main HQ. We have a policer policy set to limit bandwidth so they don't over user our internet at the HQ.
What I'm trying to do is get simple netflow on this puppy, but nothing is working. I've attached three different netflow configurations I've tried on the device, as well as the base running configuration with no netflow. The only one that shows any packets is nefflow 3 (when doing a show ip flow exporter), but they never get to our solarwinds server at HQ, even though there is connectivity from vlan1 of the 881. What am I missing here?
With solarwinds I can also do QoS monitoring, and I can report over time any packets dropped do to the policer policy so we can decide if this is a good fit for us.
FastEthernet4 is connected direct to the internet
The four other ports are configured for Vlan1 the home users may plug cisco phones and computers into.
Solved! Go to Solution.
03-05-2020 12:33 PM
Option 3 ended up working, but it was a solarwinds config that was incorrect.
03-05-2020 12:33 PM
Option 3 ended up working, but it was a solarwinds config that was incorrect.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide