cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1777
Views
0
Helpful
1
Replies

push config from Prime using snmp?

jerry.larson
Level 1
Level 1

Is it possible to send a config via snmp using Prime if you can not get to exec prompt on cli?

1 Reply 1

marce1000
VIP
VIP

  - On condition  that the particular config was saved by Prime (earlier) and that the switch was entered with a correct snmp write community (string), and is snmp-reachable (via that string), from Prime.

         http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/user/guide/pi_ug/chgdevconfig.html#pgfId-1053377

           This also implies that the switch was previously known to Prime, and has configuration archives from it.

M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Review Cisco Networking for a $25 gift card