Model - 2-unit stacked C 2960-XR
I am trying to verify that traffic is passing on all members of an Etherchannel. One port of the etherchannel is port 5 of unit1 and the other port is port 5 of unit2
"sh int gix/0/5 counters" output shows traffic passing on both ports.
"sh int gix/0/5 accounting" output shows traffic flowing on the port on unit 1 only, with "No traffic sent or received on this interface" for the port on unit 2.
Attached is a picture of this output.
Why does the accounting command only show traffic for the ports on unit 1?
