05-31-2019 09:58 PM - edited 05-31-2019 10:05 PM
Dear community experts,
Please help me to solve my problem!
I need to get a value for dot1x port status. I find the OID - 1.1.8802.1.1.1.1.2.1.1.5,
but when I issue
snmpGet.exe -r:my_ip -v:2c -c:"mypassword" -o:.1.1.8802.1.1.1.1.2.1.1.5
I get response
OID=.1.1.8802.1.1.1.1.2.1.1.5 Type=<Unknown> Value=
snmpwalk also doesn't show me any OIDs that start with 1.1.
Dot1x is enabled on the switch and "show dot1x all summary" shows me dot1x port status
My image cat4500e-universalk9.SPA.03.08.05.E.152-4.E5.bin supports mib - IEEE8021-PAE-MIB
Solved! Go to Solution.
06-02-2019 06:49 AM
IEEE8021-PAE-MIB has module identity ieee8021paeMIB. Translate that to numeric OID shows it starts with 1.0.8802.
snmptranslate -On -IR ieee8021paeMIB -m +ALL
.1.0.8802.1.1.1
06-03-2019 04:21 AM - edited 06-03-2019 04:26 AM
Hi,
as suggested by Daniel, try a snmpwalk with 1.0.8802.1.1.1.1.2.1.1.5 instead.
The cisco object navigator shows a wrong ISO tree for quite some time and unfortunately they haven't reacted to my feedbacks so far...
ieee8021paeMIB MODULE-IDENTITY
LAST-UPDATED “200101160000Z”
ORGANIZATION “IEEE 802.1 Working Group”
CONTACT-INFO
“http://grouper.ieee.org/groups/802/1/index.html”
DESCRIPTION
“The Port Access Entity module for managing IEEE
802.1X.”
::= { iso(1) std(0) iso8802(8802) ieee802dot1(1)
ieee802dot1mibs(1) 1 }
HTH,
Rolf
06-01-2019 01:09 AM
Any assumption? Anyone?
06-01-2019 01:57 AM
I also try the same on 3750X and 3560CX switches, I also checked their images with Cisco SNMP Object Navigator and they all claim support for IEEE8021-PAE-MIB
And what's more interesting all switches 3750, 3560 and 4500, shows the same output
Switch#show snmp mib dot1xPaeSystem.1 dot1xPaePortEntry.2 dot1xPaePortEntry.3 dot1xPaePortEntry.4 dot1xPaePortEntry.5 dot1xAuthConfigEntry.1 dot1xAuthConfigEntry.2 dot1xAuthConfigEntry.3 --More--
So it's definitely something related to dot1x inside...
But how can I get the values?(
Maybe I'm doing something wrong?
06-02-2019 06:49 AM
IEEE8021-PAE-MIB has module identity ieee8021paeMIB. Translate that to numeric OID shows it starts with 1.0.8802.
snmptranslate -On -IR ieee8021paeMIB -m +ALL
.1.0.8802.1.1.1
06-03-2019 04:21 AM - edited 06-03-2019 04:26 AM
Hi,
as suggested by Daniel, try a snmpwalk with 1.0.8802.1.1.1.1.2.1.1.5 instead.
The cisco object navigator shows a wrong ISO tree for quite some time and unfortunately they haven't reacted to my feedbacks so far...
ieee8021paeMIB MODULE-IDENTITY
LAST-UPDATED “200101160000Z”
ORGANIZATION “IEEE 802.1 Working Group”
CONTACT-INFO
“http://grouper.ieee.org/groups/802/1/index.html”
DESCRIPTION
“The Port Access Entity module for managing IEEE
802.1X.”
::= { iso(1) std(0) iso8802(8802) ieee802dot1(1)
ieee802dot1mibs(1) 1 }
HTH,
Rolf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide