5 second CPU usage SNMP OID on ASA5515-X running 9.2(4)

[bellinom1]

Hey all,

I am trying to find the 5 second CPU usage of a 5515-X ASA running 9.2(4). I have a 5550 that it works on, running 8.4(4), as well as a 5520 running 9.1(7)4.

The OID is 1.3.6.1.4.1.9.9.109.1.1.1.1.3.  cpmCPUTotal5sec. Has Cisco just removed this OID from 9.2(4)?

Thanks in advance.

[Aditya Ganjoo]

Hi,

Could you try polling this OID:

1.3.6.1.4.1.9.9.109.1.1.1.1.8.  cpmCPUTotal5minRev

Regards,

Aditya

Please rate helpful posts and mark correct answers.

[bellinom1]

I am able to poll .1.3.6.1.4.1.9.9.109.1.1.1.1.8.1 cpmCPUTotal5minRev as well as  .1.3.6.1.4.1.9.9.109.1.1.1.1.7.1 cpmCPUTotal1minRev with no problems. I can also poll 1.3.6.1.4.1.9.9.109.1.1.1.1.3.  cpmCPUTotal5sec on my other two ASAs, but not on the 5515-X.

Thanks for your reply.

[Aditya Ganjoo · Accepted solution]

Hi,

Yes the reason for the OID change is due to the multi-core architecture of ASA-5515-x.

Here is the list of CPU OID's on ASA-5515-X

[284]   1.3.6.1.4.1.9.9.109.1.1.1.1.2.  cpmCPUTotalPhysicalIndex
[285]   1.3.6.1.4.1.9.9.109.1.1.1.1.7.  cpmCPUTotal1minRev
[286]   1.3.6.1.4.1.9.9.109.1.1.1.1.8.  cpmCPUTotal5minRev
[287]   1.3.6.1.4.1.9.9.109.1.1.1.1.9.  cpmCPUMonInterval
[288]   1.3.6.1.4.1.9.9.109.1.1.1.1.10. cpmCPUTotalMonIntervalValue
[289]   1.3.6.1.4.1.9.9.109.1.1.1.1.11. cpmCPUInterruptMonIntervalValue
[293]   1.3.6.1.4.1.9.9.109.1.2.4.1.2.  cpmCPURisingThresholdValue
[294]   1.3.6.1.4.1.9.9.109.1.2.4.1.3.  cpmCPURisingThresholdPeriod

Regards,

Aditya

Please rate helpful posts.