A/A ASA setup

[h_hammad]

Hi;

In case of lan based A/A setup , Is there any configuration should be done on the standby ASA , and how the standby IP address will be assigned to the secondary device if no configuration should be done on it ?

Thanks

[andrew.burns]

Hi,

There's an excellent learning module here:

http://www.cisco.com/E-Learning/bulk/public/celc/Cisco_QLM6_ASA_beta/course_skin.html

This will take you through the concepts and configuration step-by-step.

HTH - plz rate if useful.

Andrew.