Any help on how to setup the following scenario CUCM---H323gateway(3925)---H323gateway (Vg204)The problem in configuration on the 3925 to act as H323 to server CUCM and server Vg204 at the same time .Thanks
I need small help , The AXL service activiated in CUCM 8.5 , but I can't find a user group AXL API in the user groups , how to fix this ?This is required to CUCM to CUOM device DCR Thank you
How can I add VG204 to CME as sccp and configure the analogue ports on the VG throught CME , Cisco documents not helping much , also Is there a way I can login to CME through web ?Thanks you gents
But when I try to configure the interface on the 3925 which is connected to the VG204 as H323 , it gives me error message (duplicate media ) , here is the question :3925 G0/0 is configuered as H323 and it is conected to the network where I have CUCM...
Thanks you Aaron , but my question is how to setup the 3925 router to be H323 gateway for the CUCM call manager and to be as H323 for VG204 as well , so call from > IP phone --- CUCM --- 3925 ---VG204---analogue phone and vise versa the VG204 is di...
Here are some debug It say skinny register rejected !!92*Feb 2 05:01:22.107: ephone-(2) Allow any Skinny Server IP address 172.16.1.1*Feb 2 05:01:22.107: Skinny Phone Limit Exceeded 4/4*Feb 2 05:01:22.107: Skinny register (phones=4/4/6) REJECT fr...