access restriction cisco asa firewall remote vpn users to local

[haftomgebreyowhans4]

i want to restrict remote vpn users from accessing my local vlans.

[Marvin Rhoads]

What do you want them to access if not local networks?

[haftomgebreyowhans4]

They want to access only one vlan from my local netwrok.

[Marius Gunnerud]

Then depending on if you want to run all VPN traffic through you firewall and just allow access to that one VLAN and the rest going to internet you would use VPN filter.  If you just want relevant traffic to go over the VPN you would use split-tunneling. 

[Marius Gunnerud]

Assuming that you do not want to restrict access to all local VLANs, you could either use split-tunneling and specify the  subnets you want them to access, or you could look into using VPN filtering and again, allow access to subnets that they should be able to access.