cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Accessing Web Server in DMZ from another web server within DMZ

chucky132313
Beginner
Beginner

                  Hi

Can someone tell me if this is possible and if so what commands do i need to configure on my ASA 5510 for it to work.

I have two web server within my DMZ and i want to access the outside url of on on the web server from the other. Currently i can acces the internet from both webserver server but not the url form either webservers.

eg config

webserver 1       https://xxxxxx.xxxxxxx.com ---> public ip---> dmz ip

webserver 2       https://xxxxxx.xxxxxxx.com ---> public ip---> dmz ip

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions

cadet alain
Mentor
Mentor

Hi,

you'll need:

  1)same-security-traffic permit inter-interface

   2) enabling dns rewrite: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

2 REPLIES 2

cadet alain
Mentor
Mentor

Hi,

you'll need:

  1)same-security-traffic permit inter-interface

   2) enabling dns rewrite: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

Thanks

That worked

Ryan

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: