cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
792
Views
0
Helpful
2
Replies

Accessing Web Server in DMZ from another web server within DMZ

chucky132313
Level 1
Level 1

                  Hi

Can someone tell me if this is possible and if so what commands do i need to configure on my ASA 5510 for it to work.

I have two web server within my DMZ and i want to access the outside url of on on the web server from the other. Currently i can acces the internet from both webserver server but not the url form either webservers.

eg config

webserver 1       https://xxxxxx.xxxxxxx.com ---> public ip---> dmz ip

webserver 2       https://xxxxxx.xxxxxxx.com ---> public ip---> dmz ip

Thanks in advance.

1 Accepted Solution

Accepted Solutions

cadet alain
VIP Alumni
VIP Alumni

Hi,

you'll need:

  1)same-security-traffic permit inter-interface

   2) enabling dns rewrite: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

View solution in original post

2 Replies 2

cadet alain
VIP Alumni
VIP Alumni

Hi,

you'll need:

  1)same-security-traffic permit inter-interface

   2) enabling dns rewrite: http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968d1.shtml

Regards.

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.

Thanks

That worked

Ryan

Review Cisco Networking for a $25 gift card