06-03-2015 10:02 PM - edited 03-11-2019 11:02 PM
Hello,
Ihave ASA 5505.
I would like to use two different subnet (i.e. 192.168.X.X and 10.0.X.X) in DMZ and accessible it to outside network. I have 2 free live IP as well.
Can somebody, please guide me for doing same?
Regards,
DD
06-03-2015 10:12 PM
Hi,
I think you would have to use another device connected behind the ASA unit to make this happen.
As you are using two different subnet , you can use a Layer 3 router and configure the static route on the ASA device for the subnet behind the router.
Thanks and Regards,
Vibhor Amrodia
06-03-2015 10:56 PM
Thanks...
Is it possible through creating two DMZ...Like on one ASA interface configure DMZ and on other interface configure DMZ-1?
Thanks & Regards,
DD
06-03-2015 11:03 PM
Hi,
yes , that would also be possible. In that case , you would be configuring two different vlans on the ASA for the subnet.
Thanks and Regards,
Vibhor Amrodia
06-03-2015 11:22 PM
Thanks Vibhor...
I'll go with that and post here the result.
Thanks & Regards,
DD
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide