hi all,
i'm going to configure SNMP on our ASAs to be monitored on solarwinds' orion.
could someone advise what SNMP traps i can enable without affecting the ASA's performance (not too chatty) and just for basic monitoring stuff?
also, are these the lines i enable for SNMPv3?
snmp-server host management 10.111.0.10 community mysnmp version 3snmp-server group Authentication&Encryption v3 priv
snmp-server user myuser Authentication&Encryption v3 auth cisco1 priv md5 cisco2
snmp-server enable traps ?
configure mode commands/options:
all Enable all traps
connection-limit-reached Enable Connection Limit traps
cpu Enable CPU utilization related traps
entity Enable ENTITY MIB notifications
ikev2 Enable IKEv2 traps
interface-threshold Enable interface threshold reached traps
ipsec Enable IPSec traps
memory-threshold Enable memory threshold reached traps
nat Enable NAT related traps
remote-access Enable remote-access traps
snmp Enable SNMP traps
syslog Enable syslog traps
<cr>
