10-21-2019 11:49 AM - edited 02-21-2020 09:36 AM
Hello,
Hello,
I can't add more Logical Devices, what do you think is the issue?
Is there a limit per license, how can I check that?
another question where do we set the this ip address? it's the chassis manager(Gui) interface address
Thx a lot
Solved! Go to Solution.
10-21-2019 12:58 PM
Only on the 9300 series can one run multiple logical devices (if you have multiple Security Modules). The 4100 series only support a single logical device as a given time.
Changing the management address used by the chassis itself is done from the cli. See the following:
While you can technically do it via ssh, I would recommend using the console port for this particular change.
10-21-2019 12:58 PM
Only on the 9300 series can one run multiple logical devices (if you have multiple Security Modules). The 4100 series only support a single logical device as a given time.
Changing the management address used by the chassis itself is done from the cli. See the following:
While you can technically do it via ssh, I would recommend using the console port for this particular change.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide