09-13-2020 09:47 AM
On FP2100 running as ASA appliance mode, how can I have http and ssh access to FXOS via ASA inside data interface.
FXOS management interface in 192.168.45.45/24 and ASA inside interface is 10.0.0.0/24.
What configuration is required to make it possible? or
Do I have to connect Management/1 also on network ?
Solved! Go to Solution.
09-13-2020 10:24 AM
09-13-2020 07:52 PM - edited 09-14-2020 01:51 AM
The easiest way would be to connect the appliance management interface used by FX-OS to an inside switch where it will have a VLAN and gateway for the 192.168.45..0/24 subnet. You could possibly change the FX-OS interface to be in 10.0.0.0/24 if you don't want to use a second subnet. Its routing table (just a default gateway) could be the ASA data interface (although that's a bit recursive-seeming it should work as they are completely separate software images).
09-13-2020 10:24 AM
09-13-2020 10:39 AM
Thanks for reply Mohammed.
So, if I want to access FXOS remotely, then the 192.168.45.45 should be routable, right? and I will connect to 192.168.45.45 for https(443) and ssh?
09-13-2020 11:39 AM
09-13-2020 07:52 PM - edited 09-14-2020 01:51 AM
The easiest way would be to connect the appliance management interface used by FX-OS to an inside switch where it will have a VLAN and gateway for the 192.168.45..0/24 subnet. You could possibly change the FX-OS interface to be in 10.0.0.0/24 if you don't want to use a second subnet. Its routing table (just a default gateway) could be the ASA data interface (although that's a bit recursive-seeming it should work as they are completely separate software images).
09-14-2020 01:36 AM
Hey Marvin
I have tried the second option of FXOS management and ASA data interface in same subnet but it did not work. I'll try it again though.
Thanks
09-14-2020 01:53 AM
Depending how you are approaching it (with the ASA dataplane being the gateway) you may also need some other settings (like "same-security intra-interface" if coming from inside or a NAT and ACL if coming from outside).
09-17-2020 01:58 AM
Got this working guys. Thanks a lot for your valuable help.
FXOS and ASA mgmt interface - switch VLAN 1 -- gateway - int vlan 1
ASA data interface- switch VLAN 2
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: