11-01-2009 09:46 AM - edited 03-11-2019 09:35 AM
Hello,
How can I allow remote access via telnet and SSH to our Cisco Pix 515e? The remote comapny is giving me their external IP they will be coming from too, so we can lock it down to that IP.
Thanks
11-01-2009 09:56 AM
Hi,
Please check out this link :
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps2030/products_configuration_example09186a008069bf1b.shtml
Hope this helps
11-01-2009 11:01 AM
Telnet
SSH
AAA Authentication ssh console LOCAL
username cisco password cisco123
11-01-2009 03:47 PM
Please note you cannot telnet to the lowest security interface on the device (typically the OUTSIDE interface). SSH however would be allowed.
11-02-2009 07:00 AM
that is correct u will need to configure IPSEC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide