12-31-2018 03:55 PM - edited 02-21-2020 08:37 AM
Let me preface by saying that I am a beginner and do not have a lot of experience with firewalls.
I have a Cisco ASA 5506-x running ASA Ver 9.8 and ASDM 7.8 Firewall mode is set to routed.
My goal is to be able to rdp into any machine on the inside network from machines outside the network connected via AnyConnect VPN. I have tried allowing port 3389 but have been unsuccessful in being able to establish a remote desktop connection. My internal network is 10.10.0.x
Additionally, I have not be able to allow ping successfully over VPN as well.
Any help is appreciated.
Russell
Solved! Go to Solution.
01-05-2019 08:08 AM
Could you please post your entire running-config? Please remove any sensitive information.
Thanks
Suresh
01-02-2019 03:00 PM
01-02-2019 03:07 PM
Thank you
put this command please
nat (any,outside) 1 source static any any destination static ANYCONNECT ANYCONNECT no-proxy-arp route-lookup
01-03-2019 03:50 PM
hi
did you try this command
nat (any,outside) 1 source static any any destination static ANYCONNECT ANYCONNECT no-proxy-arp route-lookup
01-03-2019 05:33 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide