04-08-2010 10:03 PM - edited 03-10-2019 04:57 AM
the latest ios for ips is 7.0(2)
and the latest ime is 7.0.2
if i already installed the ime with 7.0.1 but the ips image now is 7.0(2),must i upgrade the ime to 7.0.2?
if it's necessary..how to do it..i checked the ime soft ,but i can not find any upgrade options,is these any .pkg soft for upgrade
thx...
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
another question.
how to check the idm version does it built within ips ios iamge?
Solved! Go to Solution.
04-08-2010 10:17 PM
The base function of IME 7.0.2 has not changed from IME 7.0.1, so you do not need to upgrade if you don't want to.
IME 7.0.2 supports more sensors now (increase sensors support from 5 to 10).
To upgrade IME 7.0.2, you can just run the install file on top of the existing version. Just have to make sure you close down the IME prior to upgrading.
Here is the read me on IME 7.0.2:
http://www.cisco.com/web/software/282829584/28797/IME-7.0-2.readme.txt
Hope that answers your questions.
04-08-2010 10:17 PM
The base function of IME 7.0.2 has not changed from IME 7.0.1, so you do not need to upgrade if you don't want to.
IME 7.0.2 supports more sensors now (increase sensors support from 5 to 10).
To upgrade IME 7.0.2, you can just run the install file on top of the existing version. Just have to make sure you close down the IME prior to upgrading.
Here is the read me on IME 7.0.2:
http://www.cisco.com/web/software/282829584/28797/IME-7.0-2.readme.txt
Hope that answers your questions.
04-08-2010 10:52 PM
thx a lot...
^_^
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide