Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
1324
Views
0
Helpful
12
Replies

Anyconnect 4.10 - ASAv 9.20 - cannot webdeploy DART and GINA modules

s_SiD_s
Level 1
Level 1

‎06-27-2024 04:28 AM

Good day team!

struggling for 3 days...reading a lot of forums didn't help me...

I have a problem. Fresh install ASAv 9.20 and Anyconnect client 4.10 (the last one)

everything work fine, exept of DART and GINA

I've made config. But no luck. 
I see that client got option "start before logon" but it disappears after client or PC reboot.
here my config:

 

webvpn
 enable OUTSIDE
 http-headers
  hsts-server
   enable
   max-age 31536000
   include-sub-domains
   no preload
  hsts-client
   enable
  x-content-type-options
  x-xss-protection
  content-security-policy
 anyconnect image disk0:/SSLVPN/anyconnect-win-4.10.08029-webdeploy-k9.pkg 1 regex "Windows NT"
 anyconnect image disk0:/SSLVPN/anyconnect-macos-4.10.08029-webdeploy-k9.pkg 2 regex "Intel Mac OS X"
 anyconnect image disk0:/SSLVPN/anyconnect-linux64-4.10.08029-webdeploy-k9.pkg 3 regex "Linux"
 anyconnect profiles SSLVPN-SBL disk0:/SSLVPN/VPN-SBL.xml
 anyconnect enable
 tunnel-group-list enable
 cache
  disable
 error-recovery disable
!
group-policy DfltGrpPolicy attributes
 vpn-tunnel-protocol ssl-client 
 webvpn
  anyconnect modules value dart,vpngina
  anyconnect profiles value SSLVPN-SBL type user
group-policy ANYCONNECT_GP internal
group-policy ANYCONNECT_GP attributes
 wins-server none
 dns-server value 8.8.8.8
 vpn-tunnel-protocol ssl-client 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value SPLIT_VPN
 default-domain value company.com
 webvpn
  anyconnect keep-installer installed
  anyconnect modules value dart,vpngina
  anyconnect profiles value SSLVPN-SBL type user
!
tunnel-group DefaultWEBVPNGroup general-attributes
 address-pool ANYCONNECT_POOL
tunnel-group ANYCONNECT_TG type remote-access
tunnel-group ANYCONNECT_TG general-attributes
 address-pool ANYCONNECT_POOL
 default-group-policy ANYCONNECT_GP
tunnel-group ANYCONNECT_TG webvpn-attributes
 group-alias BELLVPN-SBL enable
tunnel-group SSLSBL type remote-access
tunnel-group SSLSBL general-attributes
 address-pool ANYCONNECT_POOL
tunnel-group SSLSBL webvpn-attributes
 group-alias SSLSBL enable

 

 it is just a deadend for me...

Labels:
0 Helpful
12 Replies 12

s_SiD_s
Level 1
Level 1

‎06-27-2024 04:32 AM 

Jun 27 2024 14:30:12: %ASA-6-725001: Starting SSL handshake with client OUTSIDE:95.95.95.95/63933 to 91.91.91.91/443 for TLS session
Jun 27 2024 14:30:12: %ASA-6-725016: Device selects trust-point VPNSSL_RU for client OUTSIDE:95.95.95.95/63933 to 91.91.91.91/443
Jun 27 2024 14:30:13: %ASA-6-725002: Device completed SSL handshake with client OUTSIDE:95.95.95.95/63933 to 91.91.91.91/443 for TLSv1.2 session
Jun 27 2024 14:30:19: %ASA-6-113012: AAA user authentication Successful : local database : user = netadmin
Jun 27 2024 14:30:19: %ASA-6-113009: AAA retrieved default group policy (ANYCONNECT_GP) for user = netadmin
Jun 27 2024 14:30:19: %ASA-6-113008: AAA transaction status ACCEPT : user = netadmin
Jun 27 2024 14:30:19: %ASA-6-734001: DAP: User netadmin, Addr 95.95.95.95, Connection AnyConnect: The following DAP records were selected for this connection: DfltAccessPolicy
Jun 27 2024 14:30:19: %ASA-6-113039: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> AnyConnect parent session started.
Jun 27 2024 14:30:19: %ASA-6-725001: Starting SSL handshake with client OUTSIDE:95.95.95.95/63940 to 91.91.91.91/443 for TLS session
Jun 27 2024 14:30:19: %ASA-6-725016: Device selects trust-point VPNSSL_RU for client OUTSIDE:95.95.95.95/63940 to 91.91.91.91/443
Jun 27 2024 14:30:19: %ASA-6-725002: Device completed SSL handshake with client OUTSIDE:95.95.95.95/63940 to 91.91.91.91/443 for TLSv1.2 session
Jun 27 2024 14:30:19: %ASA-6-737026: IPAA: Session=0x00007000, Client assigned 10.230.1.2 from local pool ANYCONNECT_POOL
Jun 27 2024 14:30:19: %ASA-6-737006: IPAA: Session=0x00007000, Local pool request succeeded for tunnel-group 'ANYCONNECT_TG'
Jun 27 2024 14:30:19: %ASA-5-737034: IPAA: Session=0x00007000, IPv6 address: IPv6 local pool address assignment disabled.
Jun 27 2024 14:30:19: %ASA-5-737034: IPAA: Session=0x00007000, IPv6 address: callback failed during IPv6 request
Jun 27 2024 14:30:19: %ASA-4-722041: TunnelGroup <ANYCONNECT_TG> GroupPolicy <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> No IPv6 address available for SVC connection
Jun 27 2024 14:30:19: %ASA-5-109201: UAUTH: Session=0x00007000, User=netadmin, Assigned IP=10.230.1.2, Succeeded adding entry.
Jun 27 2024 14:30:19: %ASA-5-722033: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> First TCP SVC connection established for SVC session.
Jun 27 2024 14:30:19: %ASA-6-722022: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> TCP SVC connection established without compression
Jun 27 2024 14:30:19: %ASA-6-722055: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> Client Type: Cisco AnyConnect VPN Agent for Windows 4.10.08029
Jun 27 2024 14:30:19: %ASA-4-722051: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> IPv4 Address <10.230.1.2> IPv6 address <::> assigned to session
Jun 27 2024 14:30:19: %ASA-6-317077: Added STATIC route 10.230.1.2 255.255.255.255 via 10.230.1.2 [1/0] on GigabitEthernet0/0 tableid [0]
Jun 27 2024 14:30:20: %ASA-6-725001: Starting SSL handshake with client OUTSIDE:95.95.95.95/50088 to 91.91.91.91/443 for DTLS session
Jun 27 2024 14:30:20: %ASA-6-725001: Starting SSL handshake with client OUTSIDE:95.95.95.95/50088 to 91.91.91.91/443 for DTLS session
Jun 27 2024 14:30:20: %ASA-6-725003: SSL client OUTSIDE:95.95.95.95/50088 to 91.91.91.91/443 request to resume previous session
Jun 27 2024 14:30:20: %ASA-6-110002: Failed to locate egress interface for UDP from OUTSIDE:10.230.1.2/56937 to 239.255.255.250/3702
Jun 27 2024 14:30:20: %ASA-6-725002: Device completed SSL handshake with client OUTSIDE:95.95.95.95/50088 to 91.91.91.91/443 for DTLSv1.2 session
Jun 27 2024 14:30:20: %ASA-5-722033: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> First UDP SVC connection established for SVC session.
Jun 27 2024 14:30:20: %ASA-6-722022: Group <ANYCONNECT_GP> User <netadmin> IP <95.95.95.95> UDP SVC connection established without compression
Jun 27 2024 14:30:20: %ASA-6-725007: SSL session with client OUTSIDE:95.95.95.95/63933 to 91.91.91.91/443 terminated
0 Helpful

Rob Ingram
VIP
VIP

‎06-27-2024 04:48 AM

@s_SiD_s do you have multiple XML profiles, one that has SBL enabled and another that does not? They could be conflicting, hence why SBL disappears after a reboot.

0 Helpful

s_SiD_s
Level 1
Level 1

‎06-27-2024 05:10 AM

I have 1 .xml with enabled in it SBL.

SBL does not even appear in add&remove programs near the core client

0 Helpful

s_SiD_s
Level 1
Level 1
In response to s_SiD_s

‎06-27-2024 05:14 AM

here is .xml

<?xml version="1.0" encoding="UTF-8"?>
<AnyConnectProfile xmlns="http://schemas.xmlsoap.org/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://schemas.xmlsoap.org/encoding/ AnyConnectProfile.xsd">
	<ClientInitialization>
		<UseStartBeforeLogon UserControllable="true">true</UseStartBeforeLogon>
		<AutomaticCertSelection UserControllable="true">true</AutomaticCertSelection>
		<ShowPreConnectMessage>false</ShowPreConnectMessage>
		<CertificateStore>All</CertificateStore>
		<CertificateStoreMac>All</CertificateStoreMac>
		<CertificateStoreLinux>All</CertificateStoreLinux>
		<CertificateStoreOverride>false</CertificateStoreOverride>
		<ProxySettings>Native</ProxySettings>
		<AllowLocalProxyConnections>true</AllowLocalProxyConnections>
		<AuthenticationTimeout>30</AuthenticationTimeout>
		<AutoConnectOnStart UserControllable="true">false</AutoConnectOnStart>
		<MinimizeOnConnect UserControllable="true">true</MinimizeOnConnect>
		<LocalLanAccess UserControllable="true">true</LocalLanAccess>
		<DisableCaptivePortalDetection UserControllable="true">true</DisableCaptivePortalDetection>
		<ClearSmartcardPin UserControllable="true">true</ClearSmartcardPin>
		<IPProtocolSupport>IPv4</IPProtocolSupport>
		<AutoReconnect UserControllable="false">true
			<AutoReconnectBehavior UserControllable="false">DisconnectOnSuspend</AutoReconnectBehavior>
		</AutoReconnect>
		<SuspendOnConnectedStandby>false</SuspendOnConnectedStandby>
		<AutoUpdate UserControllable="false">false</AutoUpdate>
		<RSASecurIDIntegration UserControllable="false">Automatic</RSASecurIDIntegration>
		<WindowsLogonEnforcement>SingleLocalLogon</WindowsLogonEnforcement>
		<LinuxLogonEnforcement>SingleLocalLogon</LinuxLogonEnforcement>
		<WindowsVPNEstablishment>AllowRemoteUsers</WindowsVPNEstablishment>
		<LinuxVPNEstablishment>AllowRemoteUsers</LinuxVPNEstablishment>
		<AutomaticVPNPolicy>false</AutomaticVPNPolicy>
		<PPPExclusion UserControllable="false">Disable
			<PPPExclusionServerIP UserControllable="false"></PPPExclusionServerIP>
		</PPPExclusion>
		<EnableScripting UserControllable="false">false</EnableScripting>
		<EnableAutomaticServerSelection UserControllable="false">false
			<AutoServerSelectionImprovement>20</AutoServerSelectionImprovement>
			<AutoServerSelectionSuspendTime>4</AutoServerSelectionSuspendTime>
		</EnableAutomaticServerSelection>
		<RetainVpnOnLogoff>false
		</RetainVpnOnLogoff>
		<CaptivePortalRemediationBrowserFailover>false</CaptivePortalRemediationBrowserFailover>
		<AllowManualHostInput>true</AllowManualHostInput>
	</ClientInitialization>
</AnyConnectProfile>
0 Helpful

Rob Ingram
VIP
VIP
In response to s_SiD_s

‎06-27-2024 06:00 AM

@s_SiD_s if installed, SBL would appear in Add/Remove programs.

Look at the Windows event logs to see what errors there are installing the app? Have you tried another version?

0 Helpful

s_SiD_s
Level 1
Level 1
In response to Rob Ingram

‎06-27-2024 06:08 AM

no install logs. no errors.
more to say, there is no message in client programm that module are downloading and installing.

looks like ASAv just ignoring this setting in GP/
i could try 4.9 version.

now i am using 4.10.08029

0 Helpful

s_SiD_s
Level 1
Level 1

‎06-28-2024 12:50 AM - edited ‎06-28-2024 12:54 AM

in this thread,  zekebash fixed same issue i've got by re-appling the same commands.
i did it already....no luck

https://community.cisco.com/t5/vpn/anyconnect-start-before-logon-4-10-01075/td-p/4450147/page/2

0 Helpful

s_SiD_s
Level 1
Level 1

‎06-28-2024 01:03 AM

as i said before, downloading and installing didn't start at all. I do not see this proccess in client, like on picture

sSiDiUSs_0-1719561786145.png

 

0 Helpful

Rob Ingram
VIP
VIP
In response to s_SiD_s

‎06-28-2024 01:07 AM

@s_SiD_s so you are not predeploying DART and SBL, you are expecting this to be downloaded from the ASA, but it does not? If so is downloader bypassed in AnyConnectLocalPolicy.xml ?

0 Helpful

s_SiD_s
Level 1
Level 1

‎06-28-2024 05:28 AM

<BypassDownloader>false</BypassDownloader> it is OK.

0 Helpful

s_SiD_s
Level 1
Level 1

‎07-25-2024 12:36 AM

Still cannot make it work...just can't get what is wrong...

0 Helpful

s_SiD_s
Level 1
Level 1

‎10-31-2024 01:37 AM

just cannot get...why it doen't work from web deploy....very odd and mistic

0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking for a $25 gift card