eferraros@ewpartners.com
Hi,
I need to allow a range of public ips to access our server on port 8881. I am stuck on how to add a pool to it.
Public IP xxx.xxx.xxx.190
Private IP server: 10.1.10.10
Range of publics IPs to allow: xxx.70.8.125 - xxx.70.8.146
So far I've done this:
Static NAT
Static (inside,outside) tcp xxx.xxx.xxx.190 8881 10.1.10.10 8881 netmask 255.255.255.255
Well you could use an object-group ie.
object-group network publicips
network-object host xxx.70.8.125
network-object host xxx.70.8.126
.... etc
network-object host xxx.70.8.146
then use the object group in your acl ie.
access-list outside_in permit tcp object-group publicips host xxx.xxx.xxx.190 eq 8881
Jon