11-04-2009 11:18 AM - edited 03-11-2019 09:36 AM
We're using an ASA-5505 and have switched to a DSL line that uses an ActionTec m1000 modem. To pass the static IP block straight through to the ASA the modem needs to be in bridging mode - but when it is a straight pass-through the modem does not send the ISP the PPP username and password to authenticate. Is there a way to configure the ASA to send the user name and password? Thanks!
11-04-2009 11:23 PM
11-05-2009 07:13 AM
That's exactly what I was looking for. Thanks!
11-04-2009 11:26 PM
Yes, have a look here (or google "asa pppoe" :)):
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080ab7ce9.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide