03-25-2015 04:16 AM - edited 03-11-2019 10:41 PM
I recently upgraded my ASA to version 8.2(5) 55 and in addition moved to ASDM 7.4(1). When I launch the new ASDM it gets stuck at 87% when validating running configuration. I've verified that this ASA firmware version is compatible with ASDM 7.4 and upgraded Java to version 8. I am able to view all of the "monitoring" fields with no issue.
Solved! Go to Solution.
03-26-2015 01:27 AM
Hi,
I was able to verify this issue and this is a new issue.
I would recommend you to open a TAC case for the same and we will get it fixed.
Thanks and Regards,
Vibhor Amrodia
03-25-2015 05:06 AM
Hi ,
Would you be able to share your configuration ?
Thanks and Regards,
Vibhor Amrodia
03-25-2015 05:14 AM
I have posted the config file.
03-26-2015 01:27 AM
Hi,
I was able to verify this issue and this is a new issue.
I would recommend you to open a TAC case for the same and we will get it fixed.
Thanks and Regards,
Vibhor Amrodia
03-26-2015 05:51 AM
Vibhor,
I have this same problem with the same ASA and ASDM versions. Should I open a case too?
Thanks,
Shane.
03-26-2015 05:56 AM
Hi Shane,
Yes , Please open a TAC.
Thanks and Regards,
Vibhor Amrodia
04-07-2015 08:49 AM
worked for me
http://community.spiceworks.com/topic/859580-cisco-asa-5505-not-latest-version-in-the-asdm-when-running-upgrade-wizard?page=1#entry-4488445
04-09-2015 04:29 AM
Yes, rolling back to 7.3(3) worked for me as well until we can upgrade the ASA firmware separately.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide