03-31-2014 11:23 AM - edited 03-11-2019 09:00 PM
I am trying to get a cisco asa 5505 up and running but every time I try to create a NAT for the servers, the NAT will not work and the server loses communication. I have pasted my running-config in hopes that it's something simple that I have overlooked.
Thank you in advanced for any help!
: Saved
: Written by enable_15 at 02:51:41.439 CDT Tue Mar 25 2014
!
ASA Version 9.1(4)
!
hostname goode-ciscoasa
domain-name goodeco.int
enable password zaPfq2iO5oGgF4HK encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
ip address x.x.x.217 255.255.255.240
!
boot system disk0:/asa914-k8.bin
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
dns server-group DefaultDNS
domain-name goodeco.int
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network EXCHANGE1
host 192.168.1.25
description EXCHANGE1
object network EXCHANGE2
host 192.168.1.26
description EXCHANGE2
object network EXCHANGEHOSTED
host 192.168.1.121
description EXCHANGEHOSTED
object network QUICKBOOKS
host 192.168.1.30
description QUICKBOOKS
object network FILESERVER
host 192.168.1.128
description FILESERVER
object service CRM-42001
service tcp destination eq 42001
description CRM-42001
object service RDP
service tcp destination eq 3389
description RDP
object-group service EXCHANGE-PORTS tcp
description imap
port-object eq www
port-object eq https
port-object eq 55
port-object eq imap4
access-list global_access extended permit ip 192.168.1.0 255.255.255.0 any
access-list global_access extended permit tcp any object EXCHANGE1 object-group EXCHANGE-PORTS
access-list global_access extended permit tcp any object EXCHANGE2 object-group EXCHANGE-PORTS
access-list global_access extended permit tcp any object EXCHANGEHOSTED object-group EXCHANGE-PORTS
access-list global_access extended permit object CRM-42001 any object FILESERVER
access-list global_access extended permit object RDP any object QUICKBOOKS
access-list global_access extended permit icmp any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-715.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
!
object network obj_any
nat (inside,outside) dynamic interface
object network EXCHANGE1
nat (inside,outside) static x.x.x.210
object network EXCHANGE2
nat (inside,outside) static x.x.x.211
object network EXCHANGEHOSTED
nat (inside,outside) static x.x.x.220
object network QUICKBOOKS
nat (inside,outside) static x.x.x.218
object network FILESERVER
nat (inside,outside) static x.x.x.215
!
nat (inside,outside) after-auto source dynamic any interface
access-group global_access global
route outside 0.0.0.0 0.0.0.0 x.x.x.222 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd auto_config outside
!
dhcpd address 192.168.1.5-192.168.1.36 inside
!
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
!
class-map inspection_default
match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email callhome@cisco.com
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:5a058cefae4ff01b835ba396ae49039e
: end
04-03-2014 11:07 AM
try a clear xlate for a particular static NAT after you appliy it
04-11-2014 09:59 AM
Your config is a little unusual in that you're using a single access-list globally on both your interfaces, but I can't see anything obvious that shouldn't keep it from working. The "packet-tracer" command can be exceptionally useful in situations like this, so if the clear xlate doesn't help I'd try that.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide