06-21-2012 04:11 AM - edited 03-11-2019 04:21 PM
Hello everyone,
I have an ASA 5505 and I cant get it to forward RDP, but I do get hits so Something does work.
I have attached my configuration. Can someone help me with this please? Just need to forward the RDP (Remote Desktop Protocol) to 10.0.20.2
---
Nathan
Solved! Go to Solution.
06-21-2012 04:48 AM
Hi Jonathan,
Sorry but you are missing quite a bit of configuration, you would need the following:
static (inside,outside) tcp interface 3389 10.0.20.2 3389
access-list 110 permit tcp any interface outside eq 3389
This should give you the access.
And then try to RDP on the outside interface of the ASA, if you have any free public ip, you can use that as well to access the RDP. This is only if you are trying to RDP from an IP on the internet.
Hope that helps.
Thanks,
Varun Rao
Security Team,
Cisco TAC
06-21-2012 04:48 AM
Hi Jonathan,
Sorry but you are missing quite a bit of configuration, you would need the following:
static (inside,outside) tcp interface 3389 10.0.20.2 3389
access-list 110 permit tcp any interface outside eq 3389
This should give you the access.
And then try to RDP on the outside interface of the ASA, if you have any free public ip, you can use that as well to access the RDP. This is only if you are trying to RDP from an IP on the internet.
Hope that helps.
Thanks,
Varun Rao
Security Team,
Cisco TAC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide