Hallo,
I have a little Routing Problem between an ASA 5505 and OpenVPN Gateway. The ASA 5505 is my Default Gateway. When I open a VPN-Tunnel over the OpenVPN Server, I only can see the LAN IP-Address of the OpenVPN Server, but nothing else. Before I install the ASA 5505 a use a Linux Firewall. There I define a static route that set the way back to the OpenVPN Server. The same statement I define on the ASA 5505, but it does´nt work. Here are the facts:
ASA 5505 Inside IP Address - 192.168.100.252
OpenVPN Server LAN IP Address - 192.168.100.251
OpenVPN Network - 10.8.0.0/24
On the ASA 5505 I add this to the Configuration
route inside 10.8.0.0 255.255.255.0 192.168.100.251 1
What is wrong or which settings are missing
Thank yon for your help
Joachim
