cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2191
Views
0
Helpful
1
Replies

ASA 5505 - Stops before ROMMON

Hi,

I have a ASA 5505 which stops pretty early in the boot sequence.

This is all that shows up,

CISCO SYSTEMS

Embedded BIOS Version 1.0(12)13 08/28/08 15:50:37.45

Low Memory: 632 KB

High Memory: 251 MB

PCI Device Table.

Bus Dev Func VendID DevID Class              Irq

00  01  00   1022   2080  Host Bridge

00  01  02   1022   2082  Chipset En/Decrypt 11

00  0C  00   1148   4320  Ethernet           11

00  0D  00   177D   0003  Network En/Decrypt 10

00  0F  00   1022   2090  ISA Bridge

00  0F  02   1022   2092  IDE Controller

00  0F  03   1022   2093  Audio              10

00  0F  04   1022   2094  Serial Bus         9

00  0F  05   1022   2095  Serial Bus         9

Evaluating BIOS Options ...

Launch BIOS Extension to setup ROMMON

Cisco Systems ROMMON Version (1.0(12)13) #0: Thu Aug 28 15:55:27 PDT 2008.

Is this ASA bricked?

Thank you in advance,

Best regards

Everyone's tags (5)
1 REPLY 1
Highlighted
Advocate

Re: ASA 5505 - Stops before ROMMON

Hi Robin,

This might be a hardware issue, you would need to open a tac case for it. Have you tried booting it up in the rommon mode, when the ASA boots up keep hitting ctrl + brk keys, it would take you to rommon mode, if still it doesn't it shoudl be a hardware issue. Also please chcek if you have two memory sticks installed on the device or just a single?

Hope this helps.

P.S.- rate posts which are helpful.

Thanks,

Varun

Thanks, Varun Rao Security Team, Cisco TAC