Asa 5505 transparent mode- one server works, two dont.

[crutchfieldjames]

Hi,

I have a Cisco ASA 5505 firewall running in transparent mode. The configuration is fairly basic- a management IP, basic threat detection settings, inside/outside VLANs etc.  This firewall normally has one server connected to it- this works fine.

However, when adding another two servers, neither work. I have verified that the switch ports are enabled, and the servers are configured in an almost identical manner to the working one (same software stack, networking etc) in the same server rack, but when they are connected to the ASA they lose all external network connectivity.

Does anyone have any idea why this issue is occuring?

[Andrew Phirsov]

Are you using base license?

[crutchfieldjames]

Yes- I believe so.

[Andrew Phirsov]

Then probably your issue somehow is related to the "user-limit"? I mean something like what they have here:

https://supportforums.cisco.com/thread/235350

[crutchfieldjames]

That was my first thought, but show local-host displays the following:

Licensed host limit: Unlimited.

[Shaoqin Li]

configure log to debugging and reproduce the issue then get show log?

Sent from Cisco Technical Support iPad App