ASA 5505 v9.1 - etherchannel

[weber.hlne]

Hello,

I have a firewall ASA 5505 version 9.1(4) and I don't know if I can create an etherchannel with this device. I found this :

EtherChannel support

8.4(1)

You can configure up to 48 802.3ad EtherChannels of eight active interfaces each. We introduced the following commands: channel-group , lacp port-priority , interface port-channel , lacp max-bundle , port-channel min-bundle , port-channel load-balance , lacp system-priority , clear lacp counters , show lacp , show port-channel . Note EtherChannel is not supported on the ASA 5505.

 http://www.cisco.com/c/en/us/td/docs/security/asa/asa91/configuration/general/asa_91_general_config/interface_start.html#77147

Do you know if in version 9.1 I can implement etherchannel and how ?

Thanks.

[Karsten Iwen]

Sadly, the ASA 5505 can't build EtherChannels, regardless of the Software-version.

[weber.hlne]

Thanks, I will find another solution :-)