ASA 5508 OSPF LSA message thresholds

[Bmodlin]

I am working on a PCI audit for a company that has roughly 40 routers and (2) ASA 5508s in HA (Version 9.6(3)1).  All of the routers and ASA are configured with OSPF.  I needed to configure OSPF  LSA message thresholds.  It was easy on the routers:

Example:

router ospf 1
router-id x.x.x.x
max-lsa 12000
redistribute static subnets route-map OSPF-Static
network y.y.y.y 0.0.0.255 area 99

network z.z.z.z 0.0.0.3 area 99

I am not able to issue the command max-lsa 12000 on the ASA 5508, as the command is not available.

Anybody know how to configure lsa threshold on an ASA?                                                                                                                                                                                                                                                                                                                                                                                                              

[Flavio Miranda · Accepted solution]

Hi @Bmodlin

Also didn't find a good explanation for this but one possibly reason may be that a router supports up to 30 OSPF process whilst an ASA is limited to two process. 

-If I helped you somehow, please, rate it as useful.-

[Bmodlin]

Yes, that is true, but this particular feature is to limit the amount of received LSAs.....  I am looking for an ASA command to limit the LSAs received by the ASA.