03-03-2018 12:15 AM - edited 02-21-2020 07:28 AM
I created some acess-lists, and you can assign a logging level to this access-list. Now this ACL has a lot of hits
so i want to see whats happening. Only the log I then see is completely empty. I cannot figure out how to get some info in that log.
03-07-2018 12:41 AM
I am not that good on ASDM, but I can help on SSH.
Steps that I would take:
1. logging trap warning
logging host IP_of_your_syslog
2. I would set the logging level for that FW rule to warning level
I would check the syslog server.
03-10-2018 03:07 AM
Hello ,,
thank you for try to help me i try everything but the problem is the same no log in access list,, but i found in CLI ( sh logging message there is disable message ID i just enable it )and the log is show in access list ,,
this is my config for logging
sh run all | in logging
logging enable
logging timestamp
logging hide username
logging buffer-size 524288
logging asdm-buffer-size 100
logging monitor notifications
logging buffered debugging
logging trap debugging
logging history notifications
logging asdm debugging
logging facility 23
logging host Inside 192.168.1.88
logging flash-minimum-free 3076
logging flash-maximum-allocation 1024
logging rate-limit 1 10 message 747001
logging rate-limit 1 1 message 402116
logging rate-limit 1 10 message 620002
logging rate-limit 1 10 message 717015
logging rate-limit 1 10 message 717018
logging rate-limit 1 10 message 201013
logging rate-limit 1 10 message 201012
logging rate-limit 1 1 message 313009
logging rate-limit 100 1 message 750003
logging rate-limit 100 1 message 750002
logging rate-limit 100 1 message 750004
logging rate-limit 1 10 message 419003
logging rate-limit 1 10 message 405002
logging rate-limit 1 10 message 405003
logging rate-limit 1 10 message 421007
logging rate-limit 1 10 message 405001
logging rate-limit 1 10 message 421001
logging rate-limit 1 10 message 421002
logging rate-limit 1 10 message 337004
logging rate-limit 1 10 message 337005
logging rate-limit 1 10 message 337001
logging rate-limit 1 10 message 337002
logging rate-limit 1 60 message 199020
logging rate-limit 1 10 message 337003
logging rate-limit 2 5 message 199011
logging rate-limit 1 10 message 199010
logging rate-limit 1 10 message 337009
logging rate-limit 2 5 message 199012
logging rate-limit 1 10 message 710002
logging rate-limit 1 10 message 209003
logging rate-limit 1 10 message 209004
logging rate-limit 1 10 message 209005
logging rate-limit 1 10 message 431002
logging rate-limit 1 10 message 431001
logging rate-limit 1 1 message 447001
logging rate-limit 1 10 message 110003
logging rate-limit 1 10 message 110002
logging rate-limit 1 10 message 429007
logging rate-limit 1 10 message 216004
logging rate-limit 1 10 message 450001
privilege cmd level 3 mode exec command logging
privilege show level 3 mode exec command logging
privilege show level 3 mode configure command logging
privilege clear level 3 mode exec command logging
privilege clear level 3 mode configure command logging
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide