My ASA 5510 Suddenly stopped working - now it hangs in this boot loop.
After 5 attempts to boot it hangs.
I have tried hardware reset. Nothing happens.
Any help appreciated
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(11)4 03/21/08 17:09:54.41
Low Memory: 631 KB
High Memory: 256 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(11)4 03/21/08 17:09:54.41
There has been no hardware or software change for a long time.
I do suspect hardware failure, but I would expect an error message indication the nature of error.
Yes the boot sequence as provided in first post repeated it selves 5 times then the ASA halted.