Solved: asa 5510 IPSec VPN

aa123123aa · ‎08-12-2012

Hello,

I've configured ipsec vpn, and it's working fine,

I've done split tunneling, so the users would be also able to connect to the Internet as well

The complication is this,

I have an outside server, of another company that the VPN users need to connect to via http

The issue arises, that only one ip address is allowed to access this server, which is my asa public address

The vpn users connect to the Internet through their private Internet, which mean that they get a different ip, and cant access that server

Is there any way to allow communication through the vpn to that server?

I would appreciate any help I can get with this, because as of now, there isn't really a point in the vpn, because that's their main work

I'm using asa 5510 version 8.4(4), ASDM 6.4

Thank you.

Jennifer Halim · ‎08-12-2012

You would need to configure that server ip address in the split tunnel list.

Then you would need to enable "same-security-traffic permit intra-interface" on the ASA.

Lastly, you would need to configure NAT on the outside interface for the VPN Pool subnet, to be PATed to the same ASA public ip address, that way, the VPN users will route the traffic destined towards that server via the vpn tunnel, and hair pin on the ASA using the ASA public ip address to access the server.

View solution in original post