ASA 5510 no traffic flowing

[Wajma_2]

Hello,

I have manually configured the Firewall ASA 5510 from existing PIX to match the configuration, however when I connect the firewall to the Network, no traffic is flowing in either direction. I have the Inside network on the 172.29.0.0 subnet and the outside network on 20.2.0.0 subnet. I am attaching the cofiguration file. If anybody can tell me what I am missing please.

Thank you for your help.

WO

[varrao]

Hi Wo,

If you ahve just replaced the PIX with the ASA, I would request you to just reload the ISP router which is connected to the ASA on the outside, you might just need to clear out the arp entries on the router. Your configuration is all good.

Thanks,

Varun

[Wajma_2]

Thank you for the response, but this is an internal firewall and both networks are internal no ISP involved.

[varrao · Accepted solution]

Then just reload the upstream and downstream devices connected to the firewall, to clear out the arp entried in the cache.

-Varun

[Wajma_2]

Thank you for your help.