ASA 5510 PORT MAPPING

[mohammed abdul naveed]

Hi guys, 

i am having issue in port mapping , i have one public ip and three private ip's , i need to nat 3 private on port no 8080 pubicly , 

but i cannot do it on asa with one public ip and 3 private to be access on port 8080 , 

do some one can help me out in this .

[Rishabh Seth]

If you have one public IP address then you require different port for each internal ip to create mapping.

So either you can make your internal servers to listen on three different ports or you can get three public IP addresses.

Hope it helps.!!

[Marius Gunnerud]

This is not possible on the ASA.  You would need to get a loadbalancer which will equally distribute traffic between the 3 servers.  If you are running different web services on the 3 servers then you need to do as risseth has mentioned (either use different external ports or get 3 public IPs.)

--

Please remember to select a correct answer and rate helpful posts