02-25-2009 03:31 PM - edited 03-11-2019 07:57 AM
Hi,
I need to manage an ASA 5510 by remote using a Cisco vpn client.
I have a 7.2(1) an it's running. I logged into the vpn and ssh I can connect the inside IP of the ASA. I cannot ping the inside IP!
Trying the same scenario on another 5510 with ASA 7.2(4) doesn't work.
Any help?
Regards, Celio
02-25-2009 09:30 PM
Celio,
Does your config have management-access
in order to manage the ASA via VPN tunnel you need management-access statement.
http://www.cisco.com/en/US/docs/security/asa/asa80/command/reference/m.html#wp1987122
typical statement
asa(config)#management-access inside
if management0/0 is your only management interface defined by statement under the interface you may need
management-access management
try these and let us know if issues.
Regards
PLS rate any helpful posts
03-06-2009 01:28 AM
Hi Jorge,
I tried different combinations of management-access.
Under 7.2(1) I have no such command and it works!
Under 7.2(4) I configured:
management-access inside
ssh RA-VPN-IP inside
and it works!
Thx for your help.
Celio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide