Asa 5520 static nat 8.4

[navypop42]

I have a asa 5520 with an outside and backup interface. I am trying to configure two static nat statements from the inside to the outside and

backup interface.

Here is what I have configured so far.

object network obj-10.1.1.254

host 10.1.1.254

object network obj-10.1.1.254

nat (inside,outside) static 172.25.10.3

I want to also use nat (inside,backup) static 172.25.10.3

[Julio Carvajal]

Hello,

Then you will need to create another Nat statement.

object network obj-172.25.10.3

host 172.25.10.3

Nat (inside,backup) source static obj-10.1.1.254  obj-172.25.10.3

I would do it like that, let me know if these is the answer you are looking for.

Regards,

Julio

[navypop42]

This did not work?

Thank You

Bill Murray

315-435-4768

315-264-9152

From: jcarvaja

To: navypop42

Date: 10/17/2011 08:34 PM

Subject: - Re: Asa 5520 static nat 8.4

[Julio Carvajal]

Hello,

I am sorry, I dont know what I was thinking when I wrote that down lol.

Now the thing is as you are using a different ISP you will have a different public IP address.

So you will need to do it based on that new Public Ip. lets say is 20.3.2.1

So the solution would look like

     object network obj- 20.3.2.1

          host 20.3.2.1

     Nat (inside,backup) source static obj-10.1.1.254  obj- 20.3.2.1

Regards,

Julio