ASA 5525-X Cluster Pool must be configured in this interface error

[Tan Jay Sern]

Hi guys,

I previously have both my ASA 5525-X with cluster configurations. Recently, I decided to remove the cluster configuration and issued a write erase and reload the ASA. However, when Im trying to configure an ip address on any interface it shows the error

"Cluster Pool must be configured in this interface"

I checked the mode, its single and the configuration is clean without cluster configurations.

Please advice on how to solve this issue and your help is much appreciated.

Regards.

[Marius Gunnerud · Accepted solution]

from global config mode, enter the command:

no cluster interface-mode

let me know how it goes.

--

Please rate and select a correct answer

[Tan Jay Sern]

It works, thanks.