09-23-2019 09:52 AM
We have ASA 5545, when we execute show run or show run | in ... , the session hangs and does not come back. this issue happen only in the active unit. The standby mode, session comes back immediately.
I did not have any high CPU, leak memory, overrun or any huge traffic on ASA.
But we faced a failover trigger process before 3 days, the active unit became failed due to interface failed and secondary became active. after that, the secondary failed and the active became standby unit.
09-23-2019 11:20 AM
09-24-2019 06:19 AM
Hi,
Verify there are no captures running on the asa and clear the buffer.
09-24-2019 06:52 AM
Hi,
Share the logs, If there are any logs generated otherwise connect to TAC team.
10-01-2019 05:38 AM
I did not have any logs, but it is a new version!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide