cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
407
Views
0
Helpful
0
Replies

ASA 5585-x and ASR 1002-x subinterface configuration issue

prem.ce24
Level 1
Level 1

Hello,

I have configure ASA 5585 in multi context mode and ASR 1002x Router as isp gateway

but I am unable to ping 10.1.2.3 from context c1 and 10.1.2.1 from ASR Router

and unable to ping 10.1.2.11 from context c2 and 10.1.2.9 from ASR Router

ASA interface GigabitEthernet0/0 directly connected to ASR 1002-x Routr interface GigabitEthernet0/0/1

ASA 5585 and ASR 1002x configuration given below:

SYSTEM

interface GigabitEthernet0/0
!
interface GigabitEthernet0/0.100

description Context c1 outside interface
 vlan 100
!
interface GigabitEthernet0/0.200
 description Context c2 outside interface
 vlan 200

Context c1

interface outside
 nameif outside
 security-level 0
ip add 10.1.2.1 255.255.255.248 standby 10.1.2.2

Context c2

interface outside
 nameif outside
 security-level 0
 ip add 10.1.2.9 255.255.255.248 standby 10.1.2.10

ASR Router configuration

interface GigabitEthernet0/0/1.100
 encapsulation dot1Q 100
 ip address 10.1.2.3 255.255.255.248
!
interface GigabitEthernet0/0/1.200
 encapsulation dot1Q 200
 ip address 10.1.2.11 255.255.255.248

0 Replies 0
Review Cisco Networking for a $25 gift card